Comment
Author: Admin | 2025-04-28
Proper operation. The following message displays when a different SD card is installed: WARNING: Non-IT SD flash detected. Use of this card during normal operation can impact andseverely degrade performance of the system. Please use supported SD flash cards only. You can find Cisco’s policy on Third Party Components here: https://www.cisco.com/c/en/us/products/warranties/warranty-doc-c99-740959.html#_Toc3320258 SFP Support The following table lists the specific SFP transceivers and their characteristics. Note LRM optics are not supported since the SFP is direct driven from the Cisco ASIC. Supported SFP and SFP+ Modules Table 12. Supported Modules Part Number Specification SFP Type Max Distance Cable Type Temp Range DOM Support GLC-SX-MM-RGD= 1000BASE-SX GE 550m MMF IND Yes GLC-LX-SM-RGD= 1000BASE-LX/LH GE 550m/10km MMF/SMF IND Yes GLC-SX-MMD= 1000BASE-SX GE 550m MMF EXT Yes GLC-LH-SMD= 1000BASE-LX/LH GE 550m/10km MMF/SMF EXT Yes GLC-BX-D= 1000BASE-BX10 GE 10km SMF COM Yes GLC-BX-U= 1000BASE-BX10 GE 10km SMF COM Yes GLC-ZX-SM-RGD 1000BASE-ZX GE Approx. 70km SMF IND Yes GLC-EX-SMD= 1000BASE-EX GE 40km SMF EXT Yes SFP-GE-S= 1000BASE-SX GE 550m MMF EXT Yes GLC-SX-MM= 1000BASE-SX GE 550m MMF COM No GLC-T-RGD= 1000BASE-T GE 100m Copper IND N/A GLC-LH-SM= 1000BASE-LX/LH GE 550m/10km MMF/SMF COM No GLC-TE= 1000BASE-T GE 100m Copper EXT N/A GLC-T= 1000BASE-T GE 100m Copper COM N/A CWDM-SFP-xxxx= (8 freq) CWDM 1000BASE-X GE — SMF COM Yes DWDM-SFP-xxxx= (40 freq) DWDM 1000BASE-X GE — SMF COM Yes SFP-10G-BXD-I= 10GBASE-BX10 10GE 10km SMF IND Yes SFP-10G-BXU-I= 10GBASE-BX10 10GE 10km SMF IND Yes SFP-10G-SR-X= 10GBASE-SR 10GE 400m MMF EXT Yes SFP-10G-LR-X= 10GBASE-LR 10GE 10km SMF EXT Yes SFP-10G-SR= 10GBASE-SR 10GE 400m MMF COM Yes SFP-10G-LR= 10GBASE-LR 10GE 10km SMF COM Yes SFP-H10GB-CUxM= 10G Passive Twinax 10GE 1m/3m/5m Twinax COM N/A SFP-H10GB-ACUxM= 10G Active Twinax 10GE 7m/10m Twinax COM N/A SFP-10G-T-X * 10GBASE-T 10GE Up to 30 meters Cat6A/Cat7 EXT NA
Add Comment