Comment
Author: Admin | 2025-04-28
Screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances. Do-It-Yourself Stories from Customers like You The lint catch was broken Misti P. • Spokane, WA • January 18, 2019 This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more More $4.95 Compare At: $5.89 You Save: $0.94 Best Seller Genuine GE part Dishwasher Water Inlet Valve By: GE Part Number: WD15X93 The Dishwasher Water Inlet Valve is an OEM part for GE dishwashers. It controls the flow of water into the dishwasher during each cycle phase. The valve regulates water pressure and volume to provide the right amount for washing, rinsing, and adjusts flow based on cycle settings. Causes of a bad water inlet valve include mineral buildup from water hardness inhibiting movement or damage allowing leaks.Symptoms of a bad inlet valve are: Incomplete or inadequate washing Long cycle times or shutting off prematurely Water leaking or spraying inside machineThis genuine GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. This part fixes the following symptoms Will not fill with water See more... Do-It-Yourself Stories from Customers like You Dishwasher would not fill with water Robert N. • Susanville, CA • January 09, 2016 I took the inlet valve apart, found it was clogged with sediment, so I cleaned it and reinstalled it. Water was still not filing, so I figured the valve was sticking. I ordered a new valve,because $30 was a lot cheaper than a new dishwasher. I took out the old valve with two screws, and disconnected the supply line, the brass elbow, one hose, and a wiring harness. I reattached it in the same place, re-using the all the other parts, and once I turned the power and water back on, it worked as... Read more More $40.46 Compare At: $54.85 You Save: $14.39 Best Seller Genuine GE part Soap Dispenser Lever By: GE Part Number: WD16X313 The Soap Dispenser Lever is an OEM part for GE dishwashers. It operates the soap dispenser door, releasing detergent into the dishwasher at the appropriate time during the wash cycle. This lever ensures that detergent is dispensed efficiently for optimal cleaning performance.Causes of a bad soap dispenser lever can include wear and tear over time, accumulation of detergent residue, or damage due to accidental mishandling or impact. When the lever malfunctions, the detergent might not be released properly, leading to poor cleaning results.Symptoms of a bad soap dispenser lever
Add Comment