Comment
Author: Admin | 2025-04-28
Slag models to our industry, and to provide our community with up-to-date resources for calculating some of these properties as part of practical applications. The work is a step towards a comprehensive collection of updated reviews and resources relating to the physical properties of slags.... Because of the high operating temperatures of the alloy and slag baths, the accelerator algorithm was tested from 1500 K to 2100 K. Four regions of interest in the ilmenite smelting system were investigated with ranges of average compositions identified from literature; (1) the alloy bath (Zietsman 2004;Gous 2006), (2) the slag bath (Zietsman 2004;Gous 2006;Murty, Upadhyay, and Asokan 2007;Pistorius 2007), (3) the reduction zone where ilmenite feedstock (Zietsman 2004;Murty, Upadhyay, and Asokan 2007) and reducing agents are introduced into the furnace in ratios identified from (Pistorius 2007), and (4) the interface between the slag and alloy bath as a 1:1 mass-based ratio between the alloy and slag bath. The mass fraction and corresponding system component mole fraction ranges for the four regions are shown in Table 11.1. ...... Because of the high operating temperatures of the alloy and slag baths, the accelerator algorithm was tested from 1500 K to 2100 K. Four regions of interest in the ilmenite smelting system were investigated with ranges of average compositions identified from literature; (1) the alloy bath (Zietsman 2004;Gous 2006), (2) the slag bath (Zietsman 2004;Gous 2006;Murty, Upadhyay, and Asokan 2007;Pistorius 2007), (3) the reduction zone where ilmenite feedstock (Zietsman 2004;Murty, Upadhyay, and Asokan 2007) and reducing
Add Comment