Comment
Author: Admin | 2025-04-28
#1 I recently purchased an rx 580 8gb with a custom shroud the seller claimed was flashed with a mining bios. GPU-Z says the bios is "AMD Radeon RX 580 2048SP" I've been fighting with this for a while now and no matter what I do to the settings in MSI afterburner I only ever get 3.5 ish Mh/s. This is on gminer, projectred miner, and phoenix miner, just for shiggles I also ran it on nicehash with no improvement. It's not a thermal issue because it never goes over 55 C. I've tried reinstalling drivers, DDU and reinstall, to no avail. I've swapped it to known good ports and psu cables. I'm going to try and switch from windows to HiveOS as the seller mentioned it might not play well with windows but I want to see if anyone else has any ideas. My XFX rx 580 and my P90 are still mining fine and the 5700xt I used to have ran fine for a year. Specs as follows:Mobo- Biostar tb250-BTC D+Processor- Pentium G4400RAM- 8gb single channelPSU- Cougar GX 1050W 80+ gold #2 Have you checked the AMD Drivers for the Compute setting or is it on 3D/gaming or whatever the other option is Could also be a bad bios on the card, make sure all that stacks up before loosing your marbles too much more Welcome to TPU! #3 I recently purchased an rx 580 8gb with a custom shroud the seller claimed was flashed with a mining bios. GPU-Z says the bios is "AMD Radeon RX 580 2048SP" I've been fighting with this for a while now and no matter what I do to the settings in MSI afterburner I only ever get 3.5 ish Mh/s. This is on gminer, projectred miner, and phoenix miner, just for
Add Comment