Comment
Author: Admin | 2025-04-27
X16 lanes (Gen 3.0 compatible) Networking Port: Single OSFP InfiniBand and Ethernet Data Rate InfiniBand (Default) NDR200/HDR/HDR100/EDR/FDR/SDR Ethernet 200/100/50/40/10/1 Gb/s Ethernet Protocol Support InfiniBand: IBTA v1.5aAuto-Negotiation: NDR200 ( 2 lanes x 100Gb/s per lane ) port, HDR (50Gb/s per lane) port, HDR100 (2 lane x 50Gb/s per lane), EDR (25Gb/s per lane) port, FDR (14.0625Gb/s per lane), 1X/2X/4X SDR (2.5Gb/s per lane). Ethernet Protocols supported by the electrical interfaceb 200GAUI-2 C2M, 200GAUI-4 C2M, 200GBASE-CR4, 100GAUI-2 C2M, 100GAUI-1 C2M, 100GBASE-CR4, 100GBASE-CR2, 100GBASE-CR1, 50GAUI-2 C2M, 50GAUI-1 C2M, 50GBASE-CR, 50GBASE-R2 , 40GBASE-CR4, 40GBASE-R2, 25GBASE-R, 10GBASE-R, 10GBASE-CX4, 1000BASE-CX, CAUI-4 C2M, 25GAUI C2M, XLAUI C2M , XLPPI, SFI Capabilities MCX75310AAS-HEAT Secure Boot Enabled, Crypto Disabled Electrical and Thermal Specifications Voltage: 12V, 3.3VAUXMaximum current: 100mA Typical power with passive cables in PCIe Gen 5.0 x16 16.7W The complete electrical and thermal specifications are provided in "NVIDIA ConnectX-7 Adapter Card Product Specifications" document. You can access the document either by logging into NVOnline or by contacting your NVIDIA representative. Environmental Temperature Operational 0°C to 55°C Non-operational -40°C to 70°Cc Humidity Operational 10% to 85% relative humidity Non-operational 10% to 90% relative humidity Altitude (Operational) 3050m Regulatory Safety: CB / cTUVus / CE EMC: CE / FCC / VCCI / ICES / RCM / KC RoHS: RoHS Compliant Notes : a. The ConnectX-7 adapters supplement the IBTA auto-negotiation specification to get better bit error rates and longer cable reaches. This supplemental feature only initiates when connected to another NVIDIA InfiniBand product.b. This table lists the electrical protocols. A wide range of optical protocols are delivered through the C2M interfaces listed in this table and optical modules. Examples are 100GBASE-SR4 and 400GBASE-DR4. c. The non-operational storage temperature specifications apply to the product without its package. Note The Socket-Direct ready cards kit does not include the PCIe passive auxiliary connection card and two Cabline SA-II Plus harnesses . For more information, please refer to PCIe Auxiliary Card Kit. Note ConnectX-7 adapter cards with OSFP form factor support RHS (Riding Heat Sink) cage only. Physical Adapter Card Size PCIe Half Height, Half Length 2.71 in. x 6.6 in. (68.90mm x 167.65 mm) Auxiliary PCIe Connection Card Size 5.09 in. x 2.32 in. (129.30mm x 59.00mm)Two Cabline CA-II Plus harnesses (white and black) Interfaces See Supported Interfaces PCI Express Interface Gen 5.0/4.0: SERDES @ 16/32GT/s, x16 lanes (4.0 and 3.0 compatible) Optional: Additional PCIe x16 Gen 4.0 @ SERDES 18GT/s through the PCIe auxiliary passive card and Cabline SA-II Plus harnesses Networking Ports Dual QSFP112 InfiniBand and Ethernet Data Rate InfiniBand NDR200/HDR/HDR100/EDR/FDR/SDR Ethernet (Default Mode) 200/100/50/25/10 Gb/s Protocol Support InfiniBand: IBTA v1.5aAuto-Negotiation: NDR200 ( 2 lanes x 100Gb/s per lane ) port, HDR (50Gb/s per lane) port, HDR100 (2 lane x 50Gb/s per lane), EDR (25Gb/s per lane) port, FDR (14.0625Gb/s per lane), 1X/2X/4X SDR (2.5Gb/s per lane) Ethernet Protocols supported by the electrical interfaceb 200GAUI-2 C2M, 200GAUI-4 C2M, 200GBASE-CR4, 100GAUI-2 C2M, 100GAUI-1 C2M, 100GBASE-CR4, 100GBASE-CR2, 100GBASE-CR1, 50GAUI-2 C2M, 50GAUI-1 C2M, 50GBASE-CR, 50GBASE-R2 , 40GBASE-CR4, 40GBASE-R2, 25GBASE-R, 10GBASE-R, 10GBASE-CX4, 1000BASE-CX, CAUI-4 C2M,
Add Comment