Comment
Author: Admin | 2025-04-27
PAM, or ...)- enable "Show sensor fields" in the K menu- it will only show up when you are in the "Setup mining job" menu"Wrong sensor direction" is displayed- check this for a horizontal miner (drills on the front side): sensor FRONT direction = ship FORWARD direction = drills FORWARD direction sensor UP direction = ship UP direction sensor DOWN direction = ship DOWN direction- check this for a vertical miner (drills on the down side): sensor FRONT direction = ship DOWN direction = drills FORWARD direction sensor UP direction = ship FORWARD direction sensor DOWN direction = ship BACKWARD directionIf the sensor is correct aligned and the error is still there, then check the remote direction."Wrong remote direction" is displayed- a wrong aligned remote can cause a lot of other errors, so make sure it is aligned correctly- the remote must be aligned in flight direction- the remotes down side must be facing in the same direction as your ships down side"Script too complex" error or "Max. instructions >90%" is displayed- THIS ERROR CAN BE CAUSED BY MODS- E.g.: The Nanites mod is a known mod which crashes programmable blocks randomly- Also it is possible that your ship has too much blocks, so that the script needs too much instructions to control them- you can check the instructions count there: Menu -> Info -> 2nd Page -> Max. instructions (should be less then 20%)- try to reducuce the block count of your ship, ecspacaly thrusters, gyroscopes and drills"Inventory balancing
Add Comment